PE Pipe Extrusion Machine Line with CE and ISO (SJSZ65x33)
MACHINE INTRODUCTION
This extrusion line consist of plastic single screw extruder, mould, vacuum calibration tank, spraying cooling water tank, traction machine, cutting machine, stacker, and also have color line co-extruder, auto drying and feeding system for option.
This kind of production line mainly used for making PE pipe with diameter can upto63mm.
EQUIPMENT LIST
1. Single Screw Extruder
2. Mould
3. Vacuum Shaping Tank
4. Cooling Water Tank
5. Haul-off Machine
6. Cutting Machine
7. Stacker
MACHINE DETTAILS:
TRADE TERMS
Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
Delivery Time: 40 days after receipt of prepayment.
Packing Method: Packing film or wooden case
Guaranteed Time: 12 months
MACHINERUNNING TEST AND AFTER SERVICE
When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours.
MACHINE INTRODUCTION
This extrusion line consist of plastic single screw extruder, mould, vacuum calibration tank, spraying cooling water tank, traction machine, cutting machine, stacker, and also have color line co-extruder, auto drying and feeding system for option.
This kind of production line mainly used for making PE pipe with diameter can upto63mm.
EQUIPMENT LIST
1. Single Screw Extruder
2. Mould
3. Vacuum Shaping Tank
4. Cooling Water Tank
5. Haul-off Machine
6. Cutting Machine
7. Stacker
MACHINE DETTAILS:
| Item | Description | Data |
| 1 | Automatic Vacuum Feeding Machine | 1 set |
| 2. | Single Screw Extruder | 1 set |
| Screw Material | Bimetallic | |
| Surface Treatment of Screw and Barrel | Nitriding, ground | |
| Heating Mode of Barrel: | Cast-aluminium Heating Circles | |
| Cooling Mode | Air-Blower | |
| Speed Control | Frequency Conversion Control | |
| 3 | Gearbox Reducer | 1 set |
| Gear Material and Type | 20CrMnTi, Helical Gear | |
| Gear Surface Treatment | Quenching | |
| Bearings | Famous Imported Brands | |
| 4 | Vacuum Calibrating Tank | 1 set |
| Length of Tank | 6000mm | |
| Thickness of Tank | 3mm | |
| Tank Material | Excellent Stainless Steel | |
| 5 | Water Spraying Cooling Tank | 1 set |
| Length of Tank | 6000mm | |
| Tank Material | Excellent Stainless Steel | |
| Cooling Method | Enforced Water Spraying | |
| 6 | Hauling-off Machine | 1 set |
| Hauling-off Method | Caterpillar | |
| Pressing Method | Pneumatic Pressing | |
| Speed Control | JapanOmron Frequency Conversion Control | |
| No. of Caterpillar | 2(under 110mm), 3(125-250mm), 4(255-400mm), 6(above 400mm) | |
| 7 | Cutting Machine with Length Pre-setting Device | 1 set |
| Cutting Method | Blade Cutting/ Nonscrape Cutting(under160mm), Planetary Cutting (above 160mm) | |
| Pressing Method | Pneumatic | |
| Can be PLC Controlled | ||
| 8 | Pipe Colier or Stacker | 1 set |
| Pipe Colier | Applies to Dia(under 110mm) | |
| Stacker | Applies to Dia(above 110mm) | |
| Stacker Length | 6000mm | |
| 9 | Electrical Cabinet | 1 set |
| Main Electrical Components | Omron, ABB, Schneider, Delix, RKC etc. |
TRADE TERMS
Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
Delivery Time: 40 days after receipt of prepayment.
Packing Method: Packing film or wooden case
Guaranteed Time: 12 months
MACHINERUNNING TEST AND AFTER SERVICE
When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours.